Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TOP CuTTING (SEE E)
C
Use a wide sweeping motion. A slight downward
tilt of the cutting blades in the direction of motion
gives the best cutting results.
SIDE CuTTING (SEE F)
When trimming the sides of the hedge, begin at
the bottom and cut upwards, tapering the hedge
inward at the top. This shape will expose more of
the hedge, resulting in a more uniformed growth.
D
E
F
WARNING: Check extension cords before
each use. If damaged replace immediately.
Never use your tool with a damaged cord since
touching the damaged area could cause
electrical shock resulting in serious injury.
If the supply cord is damaged, it should be
replaced by a local approved Service Centre.
Take care not to expose this tool to rain.
MAINTENANCE
CLEANING
Disconnect from mains electrics supply. Using a
soft brush-remove debris from all air intakes and
cutting blade.
Wipe over surface of your Hedge trimmer with a
dry cloth.
WARNING! Never use water for cleaning
your Hedge trimmer. Do not clean with
chemicals, including petrol, or solvents as this
can damage your hedge trimmer.
ICATING THE CuTTING bLADE
F2
For easier operation and longer life, lubricate the
cutting blades before and after each use. Before
lubricating, make sure your Hedge trimmer is
disconnected from the mains electricity supply.
Apply the oil so that it runs between the two
blades.
Your trimmer should be stopped, disconnected
and oiled occasionally during use.
AT THE END OF THE CuTTING SEASON
Clean your Hedge trimmer thoroughly.
Check that all nuts and bolts are secure.
Visually inspect the Hedge trimmer for any worn
or damaged parts.
TO STORE yOuR HEDGE TRIMMER
Store the hedge trimmer in a secure, dry place
out of the reach of children. Do not place other
objects on top of the machine.
ENVIRONMENTAL
PROTECTION
This product has been marked with a
symbol relating to removing electric and
electronic waste. This means that this
product shall not be discarded with household
waste but that it shall be returned to a collection
system which conforms to the European
Directive 2002/96/CE. It will then be recycled or
dismantled in order to reduce the impact on the
environment. Electric and electronic equipment
can be hazardous for the environment and for
human health since they contain hazardous
substances.
27
Tabla de contenido
