Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.
To change the tilt -angle of the Fan Head, loosen the Tilt Adjustment Knobs on
both sides of the Grille, tilt the Fan Head to the desired angle and tighten the
knobs.
Note: It is normal for the motor to feel warm to the touch during operation. The
motor is thermally protected and will automatically shut off when it overheats for
any reason. If this happens, immediately disconnect the fan from the power outlet.
The motor bearings are permanently lubricated at the factory and do not require
any additional lubrication.
CLEANING
WARNING: Unplug from electrical supply source before cleaning. After servicing,
any safety device (including grills and blades) must be reinstalled or remounted as
previously installed.
Use soft damp cloth then wipe with dry cloth. Do not use harmful cleaners. Do not
bend the blades.
Wash guards and blades with water and a soft brush. Avoid harsh chemical
cleaners. DO NOT IMMERSE MOTOR IN WATER. Allow fan to dry completely
before use.
MODEL
WATTS(W)
LOW
MED
HV-20G
150
180
*These are approximate measures.
If you should have any further questions, please contact CUSTOMER SERVICE at
56 64 14 00.
Shipping costs for any returns of product as part of a claim on the warranty must be
paid for by the customer.
AMPS(A)
HI
LOW
MED
HI
210
1.31
1.52
1.88
Volts
N.W.
G.W.
V
kg
kg
120
6.4
7.4
Tabla de contenido
