Maintenance & Care - Black and Decker Price Pfister Wayland 48 Serie Guia De Inicio Rapido

MAINTENANCE & CARE
13
13 HANDLE INSTALLATION REMOVAL
Turn off water before proceeding! With valves in closed position, detach Decorative
Button (13A), unscrew Fastener (13B) and remove Handle Hub (13C) from Valve Stem
(13D).
14
14D
14C
14 VALVE CARTRIDGE MAINTENANCE
Turn off water supplies and relieve pressure before working on your faucet.
Remove handle (refer to step 13). Loosen Retainer Nut (14A) by turning it counter-
clockwise and lift out the Cartridge Assembly (14B). Inspect the Rubber Valve Seat
(14C) inside Faucet Body (14D). Remove all debris. Re-insert Cartridge (14B) into
the Faucet Body (14D). Make sure the wings (14E) on the two sides of the cartridge
bonnet fit well into the slots (14F) on the faucet body. Tightly screw Retainer Nut (14A)
by turning it clockwise. Reinstall the handle.
13A
13B
13C
13D
14A
14B
14D
14B
14E
14F
ENGLISH
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price Pfister
Consumer Service.
3. Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp cloth
to clean and shine. Use of polish, detergents, abrasive cleaners,
organic solvents or acid may cause damage. Use of other than
a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar substance
are not acceptable for public areas or Commercial use. Installation
of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfister.com
• Installation Support
• Care and Warranty Information
4