Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3
At the points previously marked, drill on
the wall and insert your wall-plugs.
Use
a
hammer
As a reminder, the system provided is
intended for fixing in a load-bearing
wall.
5
Apply some silicone sealant to the
upper edges of the cabinet, in a U
shape, as shown in the diagram above.
Then carefully position the basin on the
latter.
4
Reposition the furniture in its desired
position. Insert the screws into the plugs
if
needed.
through a clip washer and the pre-drilled
holes
Finally, position the screw caps by clipping
them onto the washers.
6
Once in position, check that the basin
remains in position. Do not touch the
cabinet to allow the silicone to dry during
the drying time recommended by the
manufacturer.
Manu
Furniture manual NOVA FR EN SP IT - 12.2019
ENGLISH / ANGLAIS
in
the
cabinet.
Page 14 / 29
Tabla de contenido
