Manual & Plasmawave - Winix Tower Q Manual Del Usuario

MANUAL & PLASMAWAVE
3. Manual Mode (setting fan speed)
Users can opt to manually set the fan speed to Low, Medium, High, or
Turbo.
① Press the Mode button to set the
desired fan speed.
When the button is pressed the unit
•
will cycle through Auto Mode, Sleep
Mode and fan speeds (Low, Medium,
High, Turbo).
When Manual Mode is selected, Auto and Sleep Modes are
Note
•
automatically disabled.
4. PlasmaWave
By default, PlasmaWave
① When the unit is on, press and hold
the Mode button for at least 3 seconds
to enable or disable this feature.
When PlasmaWave
•
indicator light will be on. When it is
disabled the light will be off.
In Auto mode, as the indoor air quality improves, the fan
Note
•
speed will automatically be reduced to Low.
When the unit is running, you may hear a chirping or buzzing
•
sound. The sound is from large particles passing through
PlasmaWave
failure.
English
®
®
is enabled whenever the unit is powered on.
®
® is enabled the
® , it is normal and does not signify product
3
seconds
NK305 13