Graham Field Lumex 89180 Serie Instrucciones De Montaje Y Operación página 2

Info: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT
use Shower Chair. Contact carrier / dealer for further instruction.
Installing the Backrest Upholstery:
Fig. 1
1. Locate the backrest and backrest upholstery.
2. Lay the backrest on a flat surface.
3. Slide the backrest upholstery over the backrest tubing as shown in Figs. 1 and 2.
4. Attach the hook and loop over the top of the backrest as shown in Fig. 3.
Attaching the Backrest:
1. Lock the rear casters to prevent Shower Chair from moving during assembly: step on
rear caster lever and press down to lock (to unlock: push up rear caster lever).
2. Locate the channel guides (2 each) on the back side of the chair frame near the seat.
Slide the backrest support tubes into the channel guides as shown in Fig. 4.
3. Ensure the tubes are pressed all the way in and the backrest support tubes are even.
4. Locate the two Phillips head screws.
5. Insert the screws through backrest tube predrilled holes; use a Phillips screwdriver to
tighten screws as shown in Fig. 5.
WARNING: Ensure backrest is securely installed and all hardware is tight before
proceeding.
89180-INS-LAB-RevD19
Fig. 2
Fig. 4 Fig. 5
Fig. 3
2