Control Elements; Connection Mode - TECshow LINK WI-PLAYER Manual De Usuario

3. CONTROL ELEMENTS

1. Auto Output Connector: Connector for output
signal.
2. Antenna for receiver: Receive signals from the
transmitter. To receive the signal better, please
make sure the antenna is not sheltered.
3. AP LED: The AP LED will light up when the Link
WI Player is on AP mode.
4. Mode: Press and hold Mode button about 3

4. CONNECTION MODE

There are two kinds of connection mode: AP Mode
and STA Mode.
Note: If you want to change the connection mode,
please press and hold the key "mode" for about 3s.
Then the flicker of AP or STA indicator light denotes
entering AP or STA mode.
AP Mode
How to connect?
After the power is on, the LED of AP lights, the sys-
tem enters the AP Mode (the point to point mode).
Mobilephone or tablet PC search and connect
to the "Link Wi Player_******". The password is
87654321.
1
2 3 4 5 6 7 8
seconds to switch AP mode os STA mode.
5. Level: Adjust Link WI Player output volume by
Level knob.
6. STA LED: The STA LED will light up when Link WI
Player is on STA mode.
7. Power LED: The Power LED will light up when
Link WI Player is powered on.
8. DC Input: Power Adapter input 5VDC/1A.
English version | Tecshow Link WI Player
P. 5