Changing Battery; Resetting - Seiko TR2250 Manual De Operación

Changing Battery

The battery needs to be changed as soon as display becomes dim.
Make sure that power is switched off before replacing the battery.
• Removing the battery deletes all data stored in the
Data Bank mode, the Expense Manager mode and
the EZ-Learn mode.
• Remember to keep written copies of the important
data.
1. Turn the unit over.
2. Remove the screw and the battery cover.
3. Remove old battery.
4. Insert one new CR2032 battery with "+" side facing
you.
5. Replace the battery cover and the screw.
6. Press the "RESET" button.
58
CAUTION
• The battery may pose a choking hazard to small children.
• Keep the battery and product away from small children.
• Do not expose the battery to open flame or intense heat.

Resetting

If the unit does not operate properly after the battery has been replaced, or if at any
time the unit fails to operate properly;
1. Press the "RESET" button on the front of the unit.
(This will reset the time display.)
2. The message "
Clear Databank Memory ?
appear.
Press (No).
N
If you press (Yes), all data stored in memory
Y
will be deleted.
The contrast adjustment display will appear. (See page 9.)
" will
Clear Databank Memory?
No Yes
59