Care & Maintenance
CLEANING:
CAUTION: MAKE SURE THAT THE MOTOR BASE IS UNPLUGGED
FROM THE POWER SOURCE BEFORE INSERTING OR REMOVING
ANY ATTACHMENT AND BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR BASE INTO WATER OR
ANY OTHER LIQUID.
CAUTION: HANDLE THE BLADE ASSEMBLY CAREFULLY AS THE
BLADES ARE VERY SHARP!
1
Separate/remove all parts form each other.
2
Clean the motor base with a damp cloth and wipe dry.
3
The 24 oz. Stainless Steel Nutri Ninja
warm, soapy water with a soft cloth. It is NOT dishwasher safe. The Sip
& Seal
lid may be washed on the top rack of the dishwasher or by hand.
®
STORING:
1
Store the 24 oz. Stainless Steel Nutri Ninja
and blade assembly where they will not be damaged and won't cause a
hazard. Store the blade assembly attached to an empty cup.
Troubleshooting
Unit doesn't turn on:
• Make sure the unit is plugged in.
• Insert and rotate cup clockwise in the base until it "clicks".
Unit doesn't turn off:
• Remove cup from base by rotating cup counter clockwise and lifting out.
Display should turn off. Unplug the power cord from the outlet.
Lid/blade assembly hard to assemble:
• Do not overfill the cup with solid ingredients.
• Set the cup on a level surface. Place the lid or blade assembly on the top
of the cup and align the threads so that the lid/blades sit flat on the cup.
Twist clockwise so that the lid/blades evenly align to the cup until you
have a tight seal.
Doesn't mix well, food gets stuck:
• For best results, use Auto-iQ
food to settle towards the blades. If ingredients are routinely getting
stuck, add additional liquid or reduce the amount of hard or frozen
ingredients in the cup.
• When loading the cup, start by adding fresh fruits and vegetables, next
add leafy greens and herbs. Pour in liquid or Yogurt next. For thinner
results or a more juice-like drink, add liquid as desired. Next Add any
dry or sticky ingredients. Top off with ice or frozen ingredients.
9
1-877-646-5288
Cup should be hand washed in
®
®
programs. Pulses and pauses allow the
™
Cup, the Sip & Seal
lid
®