Tabla de contenido
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Pilot holes must be drilled to a depth of 3½ in. (8.9 cm). Be sure to drill into the center of the stud.
4.
Install wall plate
using four lag bolts
15
CAUTION:
Avoid potential personal injury or property damage! All lag bolts
movement of the wall plate
Go to STEP 3 on PAGE 16.
3
16
. Tighten the lag bolts
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
15
3 ½ in. (8.9 cm)
14
7/32 in.
(5.5 mm)
.
14
16
only until they are pulled firmly against the wall plate
16
MUST BE firmly tightened to prevent unwanted
4
15
.
15
16
13
Tabla de contenido
