Delabie TEMPOSOFT Manual De Instrucciones página 9

Wall-mounted Model
• Tighten the tap directly onto the fittings recessed
in the wall using the 15/21 supply tails.
• Connect the water supply and operate the valve several times
to stabilise the time flow.
Wall-mounted Exposed Models (excluding ref. 747801)
• Mount the valve on the wall using the screw/screws provided
(use rawl plugs that are suitable for the type of wall).
• Connect the water supply and operate the valve several times
to stabilise the time flow.
Wall-mounted Exposed Shower Kit (ref. 747801) (fig. H)
• Fix the shower head e so that the nozzle f is 2.10m
from the floor.
• Assemble the column g and the valve i.
• Insert the column into the hole beneath the shower head e.
Fix the shower head e onto the wall
(use rawl plugs that are suitable for the type of wall).
• Position the collar h in the middle of the column to cover
the joint. Fix the collar h and the valve i to the wall
(use rawl plugs that are suitable for the type of wall).
• Connect to the water supply and ensure
that all the connections are waterproof. Operate the valve
several times to stabilise the time flow.
Panel-mounted Models (fig. E)
• Drill a Ø 36mm diameter hole.
• Pass the valve through the panel.
• Tighten the nut b against the panel.
• Tighten the 2 screws a using a 3mm Allen key.
• Connect the water supply and operate the valve several times
to stabilise the time flow.
Recessed Model (fig. F)
• The wall mounting area should measure: 90x90mm,
with an adjustable depth of 50-60mm.
• Connect the valve to the water supply.
EN