Peavey CEL 2 Manual De Instrucciones página 9

CONTROL
Expander Threshold
Expander Ratio
Expander Attack
Expander Release
Compressor Threshold
Compressor Ratio
Compressor Attack
Compressor Release
Limiter Threshold
Limiter Attack
Limiter Release
Output Level
INPUT
XLR (balanced)
1/4" Phone (unbalanced)
In-Out
THD: .01% 20 Hz to 20 Hz
(10 Hz to 80 kHz BW)
SIGNAL TO NOISE:
97 dB (+4 dBu reference level)
FREQUENCY RESPONSE:
20 Hz to 64 kHz +0 dB/-1 dB
OUTPUT IMPEDANCE:
100 ohms (XLR and 1/4")
METERS:
Four 12 segment LED arrays, two
peak LEDs
CEL ™ 2 SPECIFICATIONS
ADJUSTMENT RANGE
-80dBu to +10dBu
1:1.1 to 1:3 (gate)
.5 msec (fixed)
50 msec (fixed)
-40dBu to +20dBu
1:1.1 (off) to infinite: 1 (limit)
.5 msec to 3 sec
.05 sec to 3 sec
0dBu to +20dBu (off)
.5 msec (fixed)
50 msec (fixed)
-20 dB to +20 dB
IMPEDANCE CONNECTOR
30k ohms XLR
Pin 1 = ground
Pin 2 = positive phase
Pin 3 = negative phase
10k ohms 1/4" phone
tip = input
ring = output
(see control functions above)
DIMENSIONS:
WEIGHT:
POWER REQUIREMENTS:
9
19" W x 9" D x 1.75" H
(48.26 cm x 22.9 cm x 4.44 cm)
7.3 lb
(3.31 kg)
DOM: 120 V AC 60 Hz 15 Watts Nominal
EXP: 230 V AC 50/60 Hz 15 Watts
Nominal