ASROCK 4CoreDX90-VSTA Manual Del Usuario página 13

2.4 2.4 2.4 Expansion Slots (PCI, HDMR and PCI Express Slots) Expansion Slots (PCI, HDMR and PCI Express Slots) Expansion Slots (PCI, HDMR and PCI Express Slots)
2.4 2.4 Expansion Slots (PCI, HDMR and PCI Express Slots) Expansion Slots (PCI, HDMR and PCI Express Slots)
There are 3 PCI slots, 1 HDMR slot and 1 PCI Express slot on this motherboard.
PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
HDMR slot: HDMR slot is used to insert a HDMR card with v.92 Modem
functionality.
PCIE Slot: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane
width graphics cards.
If you install the add-on PCI Express VGA card to PCIE1 (PCIE x16 slot),
the onboard VGA will be disabled.
Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card
Step 1. Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws
for later use.
Step 3. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 4. Fasten the card to the chassis with screws.
ASRock 4CoreDX90-VSTA Motherboard
1 3 1 3 1 3 1 3 1 3