ASSEMBLY OF THE HEADBOARD
E
H
H
I
J
D
5
3
6.5 mm x 100 mm Tapping Bolt
M10 x 50 mm Wood Dowel
(10 used in this step)
(8 used in this step)
③
⑤
1. Unpack the units and confirm that you have all hardware and required parts.
2. Insert the Wood Dowels (5) into the both end holes on the Headboard Rails (H, I and J) as a guide and
attach the Headboard Front Post (D) to the Rails with four 100 mm Tapping Bolts (3).
3. Repeat the same procedure to attach the Headboard Back Post (E) at the opposite end.
6