Tabla de contenido
Idiomas disponibles
Idiomas disponibles
User's Manual
Outdoor Rated Mobile Tilt Drum Blower Fan
PARTS OF THE FAN
Contains
REF
QTY
1
1
2
2
3
2
2
Wheel and Front Leg Assembly Instructions
1. Unpack the mobile unit, wheels, and front legs from their
respective cartons.
2. Place the unit on a flat, level surface and carefully tilt unit
toward one end so that the round frame tube for the wheel
assemblies is accessible.
3. Remove the screws from the wheel assemblies.
4. Insert the wheel assemblies into the base of the frame
tubing, aligning the holes of the wheel assemblies with the
holes on the frame tubing.
5. Reinsert the screws from step #3.
OPERATION INSTRUCTION
1. Plug the power supply cord into a grounded wall outlet.
(115VAC, 60Hz)
Important: This air circulator comes with a grounded (three-
prong) plug. The grounded plug must be used with a grounded
outlet.
2. Turn the control knob to LOW or HIGH to set to the desired
speed.
DESCRIPTION
Drum Fan
Wheel
Front Leg
3
1
IMPORTANT: Do not cross thread.
6. Ensure wheels turn freely.
7. Tilt unit toward opposite end.
8. Remove the screws from the front legs.
9. Insert the front legs into the sockets on the base, aligning the
holes of the front legs with the holes on the frame tubing.
10.Reinsert the screws from step #8.
Control Box
3
Tabla de contenido
