Operating Instructions - Impecca iPad 2 PowerCase Manual Del Usuario

Operating Instructions:

Charge display
To view the charge status while the iPad2 is not docked in, press the power on/off button on the
PowerCase.
The LEDs will indicate your PowerCase charge status as follows:
Three lights indicate the unit is fully charged
Two lights indicate spare charge is 80% or less,
One light indicates spare charge is 60% or less,
A slow flashing light indicates the spare charge is less than 30% and is in need of recharging,
If no lights are visible, your PowerCase should be recharged immediately.
Charging the Impecca iPad 2™ PowerCase
Connect the standard end of the USB cable with the power adaptor that came with your iPad2 or to a
USB 2.0 port on a computer.
Connect the mini end of the USB cable with the USB port located on the PowerCase.
LEDs indicate the status of the charging mode: One blue light indicates charging within 60%,two lights
indicate charging up to 80% and three lights indicates that charging is completed.
Docking your iPad2 with the PowerCase
Turn off your iPad2 and slide it into the PowerCase, making sure that the pin connector is properly and
securely inserted into the bottom of the iPad2.
Slide the top panel of the PowerCase securely into place.
To charge the iPad2:
1. Press the PowerCase on/off button. The LEDs will light up and a battery symbol will
appear on the screen of your iPad2, indicating that the iPad2 is charging.
2. Press the PowerCase on/off button to turn off the PowerCase when charging is
complete.
- 4 -