LightPro 144A Manual De Instrucciones página 16

EN
Caps on the cable end
Fit caps (covers) onto the end of the cable. Split the main cable at the end and fit the caps <Fig. G>.
The lighting is not on
In case after activation of the transformer (a part of) the lighting does not work, you should go through the
following steps:
1. Switch the transformer to "On" position, the lighting must always turn on now.
2. Is (part of) the lighting not on? Possibly the fuse switched off the transformer due to short circuit or too high
a load. Reset the fuse to the original position by pressing the "Reset" button <Fig. A1>. Also check all
connections thoroughly.
3. If the transformer functions properly in the ON position and (part of) the lighting is not on during use of the
light sensor (stand 4H/6H/8H of Auto) then check if the light sensor functions adequately and is attached to
the right location (see paragraph "location of the light/dark sensor").
CONDITIONS OF GUARANTEE
We guarantee the perfect condition and function of this appliance. The guarantee is valid for 5 years
beginning from the date of sale to the end user. We will rectify all faults arising from defective materials or
manufacturing. The guarantee covers repair or replacement of the defective parts, subject to our approval.
The guarantee does not apply to damage to parts which are subject to wear and tear nor damage or defects
caused by improper use or incorrect maintenance. The guarantee only applies if the purchase receipt is sent
to the dealer together with the appliance. This guarantee does not affect your statutory rights.
In case of recurring problems, please contact us and we will solve the issues, together with you, as
soon as possible.
+31884344520
@
[email protected]
15