Parts & Assembly - Nostalgia Products SSIC320 Instrucciones Y Recetas

PARTS & ASSEMBLY
Parts
Blending Chamber
Spout
Blending Chamber
Lid
After Taking the Unit Out of the Box
Wipe down the SOFT SERVE ICE CREAM MAKER exterior with a clean, non-abrasive cloth
or sponge. Thoroughly wash Blending Chamber, Aluminum Cylinder, Cylinder Cage
and Lid in warm, sudsy water and thoroughly dry. DO NOT put the Base in water.
Assembly
1. After drying, firmly attach Blending Chamber to Base
by placing the Blending Chamber on top of Base. If
Blending Chamber is attached properly, it will be aligned
with Base so that the Spout is over the Drip Tray.
2. Next, put Mixing Mechanism inside of Aluminum Cylinder
and put Aluminum Cylinder inside of Cylinder Cage. Then
place Cylinder assembly inside of Blending Chamber.
5
Base
Mixing Mechanism
Drip Tray
Non-Stick Aluminum
Cylinder
Cylinder Cage