ATH-Heinl ATH-M M72Z Plus Manual De Usuario página 95

CLEANING THE VALVE BLOCK
• Separate the air pipes (H) from the valve block
(V).
Clean the valve block (V) using compressed air.
•
The valve block may need to be replaced.
• Clean the silencers (S). If these are damaged,
they must be replaced.
SETTING THE MOUNTING HEAD
Loosen the fixing screw (1) on the mounting
•
head
• The angle of the mounting head to the rim can
be set by tightening and/or loosening both
grub screws (2)
The bead guide (4) projects approx. 6-7 mm
•
over the rim flange. The approach roller (3)
contacts the rim flange.
After setting, ensure that both grub screws (2)
•
and the fixing screw (1) are secured again.
CHECKING AND REFILLING THE GEAR OIL
• Turn the clamping plate to a position from
which it is easy to access the oil filler neck
Now remove the protective cover
•
Insert a flexible and transparent hose into the
•
opening and stop when the hose contacts the
base of the gear unit.
• Now, hold the end of the hose shut so that no
more air can get in.
• Next, remove the hose. The oil level must be at
least 25 mm.
If necessary, refill with the required amount of
•
oil.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-04
Manufacturer ATH-Heinl GmbH & CO.KG
- 38 -
3