LF Kobalt SGY-AIR131TZ Manual Del Usario página 12

OPERATING INSTRUCTIONS
2. To remove or loosen the threaded fasteners/
workpiece, turn the forward/reverse knob (C)
clockwise to the reverse position. Press the
trigger (D). The tool anvil (B) runs
counterclockwise removing/loosening the
threaded fasteners/workpiece (See Figure 2).
NOTE This tool features an exhaust deflector (E)
which can be rotated to any position to direct air
away from workpiece as needed (See Figure 3).
2
3
12
Clockwise