Charging The Caregiver; Unpacking Theb - DT Communications SafeKare CRU101A Manual Del Usuario

!
Before your SafeKare system is used, the battery in the caregiver receiver must be
fully charged.
The locations of the switches, indicators, and power jack, for the CRU101A receiver, are
shown in Figure 1. Become familiar with each function location.
1.2 Charging the Caregiver Receiver
Plug the AC adapter into the wall, and then plug the other end into the caregiver receiver.
See Figure 2 for reference.
A full charge will be reached in approximately 6-8 hours. The unit will not be damaged if left
charging for longer than 8 hours.
After the caregiver receiver has been charged, the receiver is ready for use.
SK101A SK101A SK101A
1.3 Unpacking the Badge/Fob
Remove the badge or fob from the metal case.
Do not dispose of this metal box. It may be needed to store or
!
ship the fob or badge
DT COMM Inc.
Power Plug Power Plug Power Plug
5 5 5
DC Power Jack DC Power Jack DC Power Jack
Figure 2. Charging the Battery
.
5
WPM101 WPM101 WPM101
110/120 V 110/120 V 110/120 V
AC Outlet AC Outlet AC Outlet
Version 1.4