Menabo paddy Instrucciones página 8

USING THE DEVICE WITHOUT THE APP
PADDY ALERT can be used with PADDY Smart Pad as an alarm that shall go off when
the user moves away from the vehicle and the child has been left unattended in
the car seat. The alarm will be both audio and visual and shall remain active until
the child is removed from the PADDY Smart Pad. The device must be paired with
the PADDY Smart Pad. Press the button for 1 second to turn on the device: a beep
will confirm the device is ON. Press the button again for 6 seconds to turn on the
pairing mode (only the first time). Press the center of the PADDY Smart Pad until a
beep sound is heard: the device is now connected to the Smart Pad. The LED flashes
every 8/10 seconds if the battery of the Smart Pad is charged; otherwise the LED will
flash continuously.
• If the connection with one or more Pads is lost, the device will go into the alarm
mode.
• To stop the alarm mode, press the button for 1 second.
• To cancel the present operating connection press down the button for 6 seconds
with the power ON.
• To erase all paired PADDY Smart Pad connections, hold down the button for 15
seconds: a confirmation beep will be heard.
• If PADDY ALERT is connected the first time with the APP it will act as a secondary
alarm, otherwise it will function as primary alarm.
8