Technical Features; Water Connection; Exhaust Connection; Electric Connection - Reverberi GAK 50 Uso Y Manutención

Manuale del d'uso ed installazione – GAK 50

TECHNICAL FEATURES

DESCRIPTION
Feeding voltage
Feeding frequency
Motor pump power
Water tank
Rpm of motor pump
Resistance assembly power
Steam pressure
Capacity at min. level (NW)
Overall dimensions
Packing dimensions
Maximum weight
INSTALLATION
Remove cardboard packaging and unscrew the 4 screws fixing the feet to the pallet. Let the
boiler slide slowly and assemble the 4 rubber feet provided in the equipment.
While carrying our this operation, it is necessary to be careful in handling the boiler, avoiding
any impact.

WATER CONNECTION

The washing machine type rubber pipe provided in the equipment should be connected to a
water mains tap.
For the models provided with tank, it is necessary to make the first filling easier by pouring an
amount of water equal to half the tank capacity.
Feed the machine with medium acidity water only (pH 7,5 +/-0,5).

EXHAUST CONNECTION

Connect the boiler exhaust tap (10) to a clothed rubber pipe of a copper pipe (do not use plastic
pipes).
Exhaust outside into the invironment or into a receptacle ret for the purpose.

ELECTRIC CONNECTION

These steam generators are standard.manufactured with three phases and an operating
voltage of 400 Volts (50Hz).
The control components work at a single-phase voltage of 230 V, therefore it is necessary to
use a suitable 5-wire cable and a general switch complying with the current safety standards.
A) Remove panel.
B) Put cable into press.
C) Connect wires into the marked terminals set for the purpose.
D) Close panel again.
R-04 del 10-12-2008-
Unit of measure M505
V
Hz
W
lt /
Rpm
KW 36
Bar
lt
mm
mm
Kg. 125
M507 M512 M514
400
50
600
/ 34 34
2900
44 36 44
5
31
680x820x H=900
800x900x H=1050
125 130 130
M515 M516
/ 34
60 60
125 130
Pag. 7 di 37