Power On/Off; Video Recording - Wiseup DVW-0001 Guia Del Usuario

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and red
indicator lights will be illuminated for 3 seconds and then the red one will turn off while the blue
one will stay illuminated, indicating the camera has entered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again in standby
mode. The blue indicator light will turn off and then the red one will flash 3 times and turn off.
[Note]:
1). The camera will shut down automatically if it is in standby mode without any operation more than
2.5 hours.
2). If the camera is running low on batteries, the blue indicator light will turn off.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and red
indicator lights will be illuminated for 3 seconds and then the red one will turn off while the blue
one will stay illuminated, indicating the camera has entered into standby mode automatically.
3.2.2. Press the Power Button once to start video recording. The blue indicator light will flash
twice and turn off.
3.2.3. Press the Power Button once twice to stop video recording. The blue indicator light will
come on and stay illuminated, indicating the camera is back to standby mode.
3.2.4. Press the Power Button once to resume video recording. The blue indicator light will flash
3 times and turn off.
[Note]:
1). A video clip will be generated and saved every 10 minutes automatically.
2). The camera can record video for 100 minutes continuously on a full charge.
3). Each video clip takes up about 400MB storage space of the internal Memory.
4). Video Resolution: 720x480 Video Format: AVI
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and red
indicator lights will be illuminated for 3 seconds and then the red one will turn off while the blue
one will stay illuminated, indicating the camera has entered into standby mode automatically.
3.3.2. Press the Camera Button once to take a photo. Every time you take a photo, the blue
indicator light will turn off and the red one will flash once then turn off. Next, the blue one will
come on and stay illuminated.
IV. Video/Image File Uploads