One-Touch Height Adjust - Ellison Evolution E2201-18 Manual Del Usuario

One-Touch Height Adjustment
① Your mower has a One-Touch Height Adjustment for varying your grass cut
height from 1 to 4 inches.
② To adjust the cutting height, face the mower from its right side and hold onto
the Lower Handle bar with your left hand. With your right hand, grip the
One-Touch Height Adjustment Knob. (See illustration on the right)
③ Pull the Height Adjustment Knob toward you to take it out of its current
position and then slide it to your left or right to change its position.
④ Note the markings of 1 and 4 (inches) and the 5 positions in between.
These 7 positions correspond to the height of grass after cutting (cut
height).
⑤ Choose a cut height based on the current height of your grass and your
lawn preference. Cut off no more than 1/3 of the current height of the grass
with each mowing.
⑥ The One-Touch Height Adjustment system has a spring-assist which makes
it easier to raise the mower to a taller cut height.
⑦ If your grass is tall, always start at the 4 inch position first and then lower the
cut height to the desired setting.
⑧ For best results, do not let grass get taller than 6 inches. The mower will not
cut well if the grass is over 6 inches tall.
Note the markings 1
and 4 (inches) and the
5 positions in between
11
4 inch cut height
Lower Handle bar
grip position
(left hand)
Height
Adjustment Knob
(right hand)
Face right side of
mower to adjust height
11