Disassembly; Cleaning And Care - Klarstein Mett Max Manual Del Usuario

EN
20

DISASSEMBLY

• Make sure that the engine is completely stopped.
• Disconnect the plug from the socket.
• Disassemble the parts by performing steps 1-6 in reverse order (see below).
Note: It is easier to remove the perforated disc by inserting a screwdriver between
the cutting blade and the perforated disc to loosen it.

CLEANING AND CARE

• Switch off the device and unplug the plug from the socket.
• Allow the appliance to cool down completely.
• Clean the housing with a damp cloth using a mild detergent. Never clean the
housing under running water and never put it in water.
• Do not clean the unit with caustic or abrasive cleaning agents.
• The attachments are not dishwasher safe. These parts should only be cleaned in
warm water with a small amount of detergent.
• When you have finished cleaning, attach the cable to the cable holder on the back
and store the unit in a dry, clean place where children have no access.