Handle Assembly - Kenmore 116.32189 Manual Del Propietário

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Before assembling
vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts LisL Use this list to verify that
you have received all the components
of
your new Kenmore vacuum,
WARNING
Electrical
Shock
Hazard
Do not plug
into the electrical
sup-
ply until
the assembly
is complete.
Failure
to do so could
result
in
electrical
shock
or injury.
,,,,,,,,,,,,,,,
,
HANDLE ASSEMBLY
Before
assem-
(_
biing your vacu-
um cleaner
be
sure you have all
the parts shown,
Remove
the screw located just below the
carry handle on the back side of
the vacuum.
Carry
Handle
Position the
handle so
the cord
hooks are
toward the
back of the
cleaner.
Insert the
handle into
the opening
at the top
of the vacu-
um,
Cord
y
Hooks
Screw
Hole
_
Handte
I
Screw
Hole
Align the screw hole in the handle with
the screw hole in the vacuum.
insert the screw so it passes
through
the
back of the vacuum
into the handte
Begin to tighten
the screw with your fin-
gers
It may be necessary
to adjust the
handle slightly,
Carny Handle
Using a screwdriver,
tight-
en the screw,
CAUTION
Do not overtighten,
Overtightening
could
strip
the
screw
holes.
Do not operate
the cleaner
without
the screw
in place°
Tabla de contenido
loading

Este manual también es adecuado para:

116.32289

Tabla de contenido