Leviton GreenMax DRC DRKDN-C1W Guia De Inicio Rapido

WARNINGS
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• If you are not sure about any part of these instructions, consult an electrician.
Product Description
GreenMax DRC Keypads are designed to be used in conjunction with a GreenMax DRC
Controller or Sapphire touchscreen to add point of user control from a box mounted device.
They are available in 1, 2, 4, or 8 button configurations. Color change kits and custom
engraving options are available.
Before Installation
• Requires standard device backbox. Keypad fills a single gang space.
Supports multi-gang installation.
• Can be used with Decora ® screwless faceplate or regular faceplate.
• Test all LumaCAN cables for proper pin-out and connectivity prior to installation.
Installation
1.
Test in-wall wiring to ensure pin-out is consistent and correct.
Follow TIA-568B wiring standards. Provide proof of network test
to Field Technician at the start of commissioning.
2.
Determine whether switch should be terminated or not.
a. If in the middle of the network (both RJ-45 connections are
used), termination switch should be in the OFF (0) position.
b. If at the end of the network (only one RJ-45 connection is
used), termination switch should be in the ON (l) position.
3.
Determine device network address which may be provided on
network plans. If not provided, assign a unique address for every
node on the network, document and provide to field technician for
use during commissioning. NOTE: valid addresses are 1-250.
Address device following the instructions in the addressing chart.
4.
Make LumaCAN connections to back of device. Once connections
are made gently stuff the cables into the wall and secure the
device to the wallbox. Install Decora faceplate.
5.
Each button's function is software configurable. See your system
programming instructions for programming details.
ID Address DIP Switch and Termination Switch / Sélecteurs d'adresse et de terminaison / Dirección ID, Interruptor DIP e Interruptor Terminal
ID Address Value = Sum of Switch Values
Valeur de l'identificateur (ID) = Somme des valeurs des sélecteurs
Valor de la dirección ID = Suma de los valores del interruptor
ID 1 ID 2 ID 3
1
2
4
8
16
32
64
128
Switch Values / Valeurs des sélecteurs / Valores del interruptor
Mounting / Montage / Montaje
Decora Screwless Wallplate
Plaque Decora sans vis
Placa de pared Decora sin tornillos
FCC COMPLIANCE STATEMENT:
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(i.) This device may not cause harmful interference (ii.) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Leviton could void the user's authority
to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
INDUSTRY CANADA COMPLIANCE STATEMENT:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device. IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This Class B digital apparatus complies with Canadian CAN ICES-3(B)/NMB-3(B).
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality Assurance Department,
165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the
purchase date. Leviton's only obligation is to correct such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal
of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not
in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the
duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage
to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
© 2018 Leviton Mfg. Co., Inc.
GreenMax
Cat. No. DRKDN-C1W, -C2W, -C4W, -C8W
Port Not Used
Port inutilisé
Puerto No Utilizado
ADDRESSING
DIP Switches
Sélecteurs d'adresse
Interruptores DIP de
DIRECCIONAMIENTO
Termination
Switch
Sélecteur de
terminaison
Interruptor de
Terminación
ID 86 = 2+4+16+64
ID 86 = 2+4+16+64
ID 86 = 2+4+16+64
ID 4 ID 5 ID 6 ID 38 ID 86
Wallbox
Boîte murale
Caja de pared
Four button shown, others similar
Modèle à quatre boutons (autres modèles similaires)
Se muestran cuatro botones, similar en otros
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
For Technical Assistance Call: 800-824-3005 - www.leviton.com
® DRC Keypads
INSTALLATION
CAUTIONS
• Test all LumaCan™ cables for proper pin-out configuration prior to interconnecting devices and systems.
• For indoor applications only
• Save these instructions.
SPECIFICATIONS
Input Voltage/Frequency
Input Current
IP Rating
Network Connections
Network Topology
Operating Temperature
Storage Temperature
Certifications
LED Indicators
Yellow: Heartbeat, normal state blinks 1x/second
Green: Communication, blinks when transmitting or receiving
Témoins
Jaunes : signal de fonctionnement normal (clignotement 1x/s).
Verts : signal de communication (clignotement à la transmission ou réception de données)
Indicadores LED
Amarillo: Red Activa, estado normal parpadea 1 vez/segundo
Verde: Comunicación, parpadea cuando transmite o recibe
LumaCan Port
Points de connexion LumaCan
Entrada LumaCan
Jumper used to segment power between the two LumaCAN ports.
Installed = Power Passes, Removed = Power Does Not Pass.
Le clavier à huit boutons est doté d'un cavalier supplémentaire pour segmenter
l'alimentation entre les deux ports LumaCAN.
S'il est mis en place, le courant passe, et s'il est retiré, le courant ne passe pas.
Puente adicional utilizado para segmentar la energía entre los dos puertos LumaCAN.
Instalado = La energía pasa, Removido = La energía no pasa.
se muestra en la posición de ENCENDIDO
Address Zero shown - All switches OFF
Adresse zéro illustrée - Tous les sélecteurs à O
Se muestra la dirección Cero - Todos los interruptores APAGADOS
Switch Variations / Divers commutateurs numériques / Variaciones del Interruptor
One and two button shown, others similar
Modèles à un et à deux boutons (autres modèles similaires)
Se muestran uno y dos botones, similar en otros
+12-24VDC
Max 50-25mA
IP30
(2) RJ-45 Cat 6 or better for connection to LumaCAN network.
Termination provided via local termination switch.
• Daisy Chain, 1600' max between repeaters.
• Home-Run topology and network length up to 10,000'
can be achieved when using LumaCAN network repeaters
(Leviton #NPRPT)
• Maximum 110 nodes between repeaters
• Maximum 250 nodes on a LumaCAN network
0-55°C
-10-85°C
FCC Class B
Back of Switch
Arrière du commutateur
Parte posterior del interruptor
Termination Switch
Shown in the ON position
Sélecteur de terminaison
Montré à la position I
Interruptor terminal
Address DIP Switches
Sélecteurs d'adresse
Direcciones de los interruptores DIP
GreenLED
Témoin vert
LED verde
PK-A3252-10-02-0A
ENGLISH
TERM
0 I
PK-A3252-10-02-0A