URBANGLIDE BIKE M2 Manual De Usuario página 11

STEP 5: BATTERY
16
STEP 6: CONNECTION
In order to start your bike, connect the battery connection cable. (17) Follow the arrows on
the cable and push it in as far as it will go. Once the connections have been made, switch
on your battery by pressing the button on the cable. (18)
If the battery does not turn on, follow these steps:
- Check your connections
- Check that the battery is properly inserted.
- Connect your battery with the charger provided
The screen on your handlebars serves as a dashboard. It displays:
Your battery is removable, you can remove it from your bike to charge it
at home for example. To do this, take the key attached to your
handlebars. (16)
To remove your battery, insert the key into the battery port, turn and
remove the battery. When you put the battery back on your bike, make
sure that you have engaged it and heard a "Click". Once the battery is
inserted, turn the key and remove it.
18
Using the screen
The battery level
- The speed at which you rent again
- The distance you have travelled
- The level of electrical assistance
For your bike to assist you electrically, the screen must be switched on. If
you have turned the key and the screen is not switched on. Electric
assistance will not be activated.
Once the connections have been made and the battery is running, switch on
your screen. To do this, hold the key located above the screen for 3
seconds.
11
17