Tabla de contenido
Duplex: On = Full, Off = Half
Gigabit Copper/SFP:
Link/Activity: Green = 1000M, Yellow = 10M or 100M;
Duplex: On = Full, Off = Half)
Gigabit SFP: Link/Activity (Green/Green Blinking)
2.3 Panel Layout
The front panel includes RS-232 Console Port, System & Port LEDs, Fast Ethernet Port
Interfaces and Gigabit Combo Port Interfaces.
The console port chooses RS-232 DB-9 types. The pin arrangement is "Pin2: TxD, Pin3:
RxD, Pin5:GND". Korenix attached the console cable within the shipped box.
In the Rear panel, there are 2 types power input connector applied to JetNet 5428G and
JetNet 5428G-DC.
JetNet 5428G/5428G-2G-2FX chooses standard AC plug as power input socket.
JetNet 5428G-DC chooses 4-pin terminal block as power input socket. Follow the V+, V-
indication in the rear panel to screw the power source.
3.1 Attach the brackets to the device by using the screws provided in the Rack Mount kit.
rack manufacturer.
3.3 When installing multiple switches, mount
them in the rack one below the other.
Note: Check if the rack environment
operating temperature range. Do not
place any equipment on top of the
switch and please properly grounded.
Tabla de contenido
