Tabla de contenido
Idiomas disponibles
Idiomas disponibles
30" ELECTRIC RANGE INSTALLATION INSTRUCTIONS
5. Leveling the Range
A. Install an oven rack in the center of the oven.
B. Place a level on the rack (see Figure 7). Take 2
readings with the level placed diagonally in one
direction and then the other. Level the range, if
necessary, by adjusting the 4 leg levelers with a
wrench (see Figure 8).
Leg
Leveler
Lower
Figure 7
Raise
Figure 8
6. Anti-Tip Bracket Installation Instructions
IMPORTANT SAFETY WARNING
To reduce the risk of tipping of the range, the range
must be secured to the floor by properly installed anti-
tip bracket and screws packed with the range. These
parts are located in a plastic bag in the oven. Failure
to install the anti-tip bracket will allow the range to tip
over if excessive weight is placed on an open door or
if a child climbs upon it. Serious injury may result from
spilled hot liquids or from the range itself. Refer to the
instructions located in the anti-tip bracket package for
proper bracket installation. If the range is moved to
a different location, the anti-tip bracket must also be
moved and installed with the range.
For the bracket installation instructions, refer to
the anti-tip bracket template shipped in the anti-tip
bracket package.
7. Checking Operation
Refer to the Use and Care Guide for operation.
Do not touch cooktop glass or elements.
CAUTION
They may be hot enough to burn you.
Before You Call for Service
Read the Before You Call for Service Checklist and
operating instructions in your Use and Care Guide.
It may save you time and expense. The list includes
common occurrences that are not the result of
defective workmanship or materials in this appliance.
5
Tabla de contenido
