PAJ GPS CAR OBD FINDER Manual De Instrucciones página 22

A faulty electrical installation or an excessive mains voltage may cause an
electric shock.

Before use, adjust the mains voltage of the socket with the information on
the type plate.

Before use, make sure that the mains voltage of the socket corresponds
with the information on the type plate.

To be able to disconnect the GPS tracker from the mains as quickly as
possible in the event of a failure, connect the power supply unit where it is
easily accessible.

If you notice any visible damage to your GPS tracker, do not use it.

Use only the original parts supplied to charge the GPS tracker.

Never place the GPS tracker near an open fire or hot surfaces.

The GPS tracker is not protected against humidity and water. Please use
and store it only in a dry environment.

Do not open the housing of the GPS tracker. Leave the repair to qualified
specialists. However, if you carry out repairs yourself, connect the GPS
tracker incorrectly or operate it incorrectly, liability and warranty claims are
excluded.
WARNING! DANGER OF EXPLOSION AND FIRE!
Below you will find information and instructions on how to use the battery:

The GPS tracker runs by a lithium polymer battery. It is not exchangeable
and must not be removed or opened.

Make sure that the GPS tracker (also when charging the battery) is kept
away from heat sources and high temperatures, such as direct sunlight in
a vehicle. Disregard of this instruction may result in destruction of the
battery and overheating, explosion and fire.

Only use the original accessories for the charging process. If the battery is
charged otherwise, this may result in overheating, explosion or fire.
WARNING! RISK OF ELECTROCUTION!
Battery mode
CAR OBD Finder 4G by PAJ with Online-Tracking V.1.0 EN
© PAJ UG (haftungsbeschränkt)
Safety
22