Tabla de contenido
4 | About this Instruction Manual
19 FLASH-DOWN key
21 Fixing screw (rod connection)
23 FLASH-UP key
25 CELL key
27 Display
4 Setting up power supply
1. Put the C13 coupling of the power cable into the C13 socket of the flash device.
2. Put the Euro-plug of the power cable into the wall socket (230V maximum voltage).
3. Move ON/OFF switch to position 'I' to turn on the device.
5 Select modeling light mode
1. Press LAMP key several times to set one of the following functions. The selected function will be
indicated by the indicator light, lighting up above or below the key.
– Free: The modeling light power can be adjusted independently from the flash power. The in-
dicator light below the LAMP key lights.
– Prop: The modeling light power can be adjusted only in dependence to the flash power. The
indicator light above the LAMP key lights.
2. Press LAMP key several times until none of the indicator lights and the modeling light is turned off
completely.
6 Setting the modeling light brightness
1. Press LAMP-UP key or LAMP-DOWN key to change the value for the modeling light brightness.
NOTICE! The setting range is between 1.0 and 6.0, whereby 1.0 is the lowest and 6.0 is the
highest value.
7 Setting the flash power
1. Press FLASH-UP key or FLASH-DOWN key to change value for the flash power.
NOTICE! The setting range is between 1.0 and 6.0, whereby 1.0 is the lowest and 6.0 is the
highest value.
2. During the flash charging process, the indicator above the TEST key will not light. If the indicator
lights, the flash is ready for use.
8 EC Declaration of Conformity
Folux B.V. has issued a "Declaration of Conformity" in accordance with applicable guidelines
and corresponding standards.
9 Warranty
The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an exten-
ded voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and
details of our services at www.bresser.de/warranty_terms.
6 / 7
20 TEST key
22 SOUND key
24 SYNC connection socket
26 Indicator light (1-5) (flash synchronization)
28 C13 power cable with Euro-plug
Quickstart_BRM-Flashes_de-en_BRESSER_v012017a
Tabla de contenido
