Optional Installation Methods; Suspension Mounting - ETI Solid State Lighting 54320142 Guía De Uso Y Cuidado

Optional Installation Methods

Suspension Mounting

NOTE: Separate mounting hardware (not included) not shown to actual size.
For mounting to drywall:
Toggle bolt x 4
For mounting to wood:
Hook screw x 4
NOTICE: Toggle bolts are not considered an acceptable means of support in Canada, in accordance with CSA C22.2 No. 250.4.
NOTE: Eye hooks can be used as an alternate method of attaching the fixture to the ceiling.
1
Mounting to drywall
□ Determine the position for the
four toggles to be secured in
the drywall mounting surface.
□ Drill four holes large enough
to clear the closed flaps of the
butterfly nut on the toggle bolt
(not included). Make sure to
fasten the toggle bolt into the
butterfly nut before inserting
the flaps into the ceiling.
□ Tighten the toggle bolts.
Part Description
Toggle Bolts Consisting of a No. 10-24 bolt 2-7/8 inches long with two
tapered wings 1 by 5/16 inch.
Studs Measuring 1-3/4 inches overall and having 1-1/4 inches of
wood screw threads on one end and at least six No. 10-24
machine screw threads on the other end.
Metal Hooks With a No. 10-24 threaded hole that engages the bolt threads.
2
Mounting to wood
□ Drill four 1/16 in. diameter
holes in the ceiling to
accommodate hook screws
(not included). Make sure
to fasten the combo wood-
machine end into the metal
hook.
□ Tighten the hook screws (not
included) into the wood.
6
3
Attaching the aircraft
cable to the ceiling
□ Place the loop of the aircraft cable
(AA) (not included) over each mounting
hook.
NOTE: If using eye hooks in the
ceiling instead, release the short end of
the aircraft cable from the quick cable-
lock by pushing in the cable release
and feed the aircraft cable through the
eye hook before reinserting it into the
quick cable-lock.
Quantity
4
2
4
AA