Listen To Music From Bluetooth Device; Listening To The Fm Radio; Auto Scan And Save Preset Station; Tune To A Preset Radio Station - SOUNDMASTER highline iP4060BT Manual Del Usuario

3. Press and hold "PAIR " button on remote
control for a few seconds to activate
bluetooth pairing mode, display panel shows
"PAIR".
4. Search for bluetooth device with your device.
5. Select "iP4060BT" in the pairing list. 6. Enter default password "0000", if the pairing
succeeds, display panel shows "BT" again.
7. To disconnect connection, turn off the
EN EN
bluetooth function on your device or switch
the player to another source.
Tips:
- If a connection exist, hold and press " PAIR "
button on remote control for a few seconds to
re-activate the pairing mode, the connection
will be interrupted.
- If no other bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
- The player will also be disconnected when
your device is moved beyond the operational
range.
- If you want to reconnect your device to this
player, place it within the operational range.
- If the device is moved beyond the operational
range, when it is brought back, please check
if the device is still connected to the player.
- If they are connected, display panel shows
"BT".
- If the connection is lost, display panel shows
"NO BT". Follow the instruction above to pair
your device to the player again.

Listen to Music from Bluetooth Device

• If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player.
• If the device also supports Audio Video
Remote Control Profile (AVRCP) ,
you can use the player's remote control
to play music stored on the device.
1. Pair your device with the player.
2. Start to play music via your device
(if it supports A2DP)
3. Use supplied remote control to
control play(if it supports AVRCP)
- To pause/resume play, press the
- To skip to a track, press the
9

Listening to the FM Radio

Auto Scan and Save Preset Station

1 Tap the ON/OFF/SOURCE button repeatedly
2 Press and hold the PROG button for a few
-

Tune to a Preset Radio Station

• Press the

Tuning in a Station

• Tune in radio stations automatically
-
•
• Tune in radio stations manually
-
•

Presetting Stations Manually

You can preset up to 20 FM stations.
1 Tune in the desired station, then press the
2 Press the
3 Press the PROG button to store the station.
4 Repeat above steps 1 to 3 for each station
button.
BF
/ buttons.
H G
on the unit or press the FM/BT button on the
remote control to select FM mode.
seconds to activate automatic programming.
All available stations are programmed in the
order of waveband reception strength.
The first programed radio station is played
automatically.
or buttons to select a preset
 
number that you want.
Press and hold the /
H G
frequency changes down or up automatically
until a station is found.
The search may not stop at a station with a very
weak signal.
Press the / buttons repeatedly until
H G
you find the station you want.
If reception is still poor, try to adjust the position
of the aerial or try to move the radio to another
location.
PROG button.
/ buttons to select the preset
 
number.
you want to store in memory with a preset
number.
buttons, the