Step 6 Arm Bar Assembly; Stroller Operation And Use - Foundations 4130079 Manual Del Usuario

STEP 6 Arm Bar Assembly

Assemble Arm Bar to Stroller
With Foundations® logo facing up and
forward, align Arm Bar (F) clamps
between Arm Bar stops on stroller
frame (1). Close clamp lock lever on
Arm Bar so that hole in clamp aligns
with button on stroller frame (2).
Press down on clamps until they lock in
place.
See Figure 8.
Note: To remove Arm Bar (F) reverse
procedure and lift up on clamps to
release.

--- STROLLER OPERATION AND USE ---

Folding and Unfolding Stroller
WARNING
• Pinch Hazard - Keep hands clear of moving parts during assembly,
folding and unfolding.
• Ensure that all the locking devices are engaged before use.
Folding Stroller.
Note: Canopies should be folded
together and seats in the upright
postion for easier folding operation (1)
See Figure 10.
Squeeze together on Right Fold Lock
Release Lever (1) . Pull both right and
left releases backwards toward handle
until handle releases. Push handle
forward after release to completely fold.
See Figure 9 and 10.
Figure 8
2
1
2
AB20076_G14A
Figure 9
8
Folding and Unfolding Stroller Continued
Folding Stroller.
After stroller is fully folded (3) insert
square plastic loop 90 degrees and
push it through the "D" ring in the
matching strap. Turn the plastic loop
until it catches in place to secure
stroller in the closed position.
See Figure 11.
To unfold stroller, reverse operation.
When unfolding, confirm that lock
release levers are engaged with a click.
Push down on stroller to make sure it
does not fold and is secure.
Also see Step 1 Unfolding Stroller in the
Stroller Assembly section.
2
1
3
Figure 10
4
5
Figure 11
9
AB20076_G15A
AB20076_G16A