Enlaces rápidos
INSTALLATION INSTRUCTIONS
FOR INTERNAL DRAIN KIT
Wall Sleeve
Sleeve
Base
1.
DRILL A .625" DIAMETER HOLE IN THE BOTTOM OF THE SLEEVE BASE TO THE
DIMENSIONS SHOWN.
2.
APPLY A SILICONE TYPE OF SEALER TO THE OUTSIDE BOTTOM EDGES OF THE
DRAIN PLATE.
3.
INSERT THE DRAIN TUBE INTO THE HOLE AND PRESS THE DRAIN PLATE DOWN TO
FORM A WATERTIGHT SEAL AGAINST THE SLEEVE BASE.
4.
DRILL A .625" DIAMETER HOLE IN THE BOTTOM OF THE BASE PAN AS SHOWN
IN THE ILLUSTRATION. THIS HOLE ALLOWS CONDENSATE TO ENTER THE WALL
SLEEVE WHERE IT TRAVELS TO THE DRAIN KIT FOR DISPOSAL.
(IDK)
Apply Sealer to
the bottom of
the Drain Plate
Drill a .625"
diameter
hole here
Dimple
0.5" In
from edge
4.75" From
back of
Drill a .625"
basepan
diameter
hole in the
bottom of
the basepan
616-197-01 (10-04)
Resumen de contenidos para Friedrich IDK
- Página 1 INSTALLATION INSTRUCTIONS FOR INTERNAL DRAIN KIT (IDK) Apply Sealer to the bottom of the Drain Plate Wall Sleeve Drill a .625" diameter 0.5" In from edge hole here Sleeve Base 4.75" From back of Drill a .625" basepan diameter hole in the...
- Página 2 INSTRUCCIONES PARA LA INSTALACION DEL IDK (KIT DE DESAGÜE) Aplique el sellador al extremo de los bordes inferiores del desagüe Gabinete .5" del borde derecho del Taldre un hueco cogegotas al ce 0.625" aquí hueco Base del Gabinete 4.75" de...
- Página 3 INSTRUCTIONS D’INSTALLATION POUR LE KIT D'ÉVACUATION DE LA CONDENSATION (IDK) Appliquer du mastic sur le fond du plateau d'évacuation Enveloppe 0.5" pouces Percer un trou à partir du de 0.625" ici coté Plateau de l'enveloppe 4.75" pouces à partir de Percer un l'arrière du...
- Página 4 FRIEDRICH AIR CONDITIONING CO. Post Office Box 1540 · San Antonio, Texas 78295-1540 4200 N. Pan Am Expressway · San Antonio, Texas 78218-5212 (210) 357-4400 · FAX (210) 357-4480 www.friedrich.com Printed in the U.S.A. 616-197-01 (10-04)