Insignia NS-CR2031 Guía De Instalación Rápida

USB cable plug
microSD/microSDHC/
microSDXC
Data LED indicator
Indicates when a slot is
SD/SDHC/SDXC/MMC/MMCplus
reading from or writing to
Note: Insert cards into this slot with the
a card
label facing DOWN.
MemoryStick, MS PRO, MS Duo,
MS PRO Duo, MS PRO-HG Duo
Before using your new product, please read these instructions to prevent any damage.
SD/MMC/MS Memory Card Reader | NS-CR2031
System requirements
• Windows® 8, Windows® 7, Windows Vista®, Windows® XP, or Mac OS 10.4.x or
higher.
Features
• Easily transfer music, photos, video, and other files between your computer and a
digital camera/camcorder, action camera, smartphone, tablet, or similar device.
• Supports SD, SDHC, SDXC, microSD, microSDHC, microSDXC, MMC, MMCplus,
MemoryStick, MS PRO, MS-Duo, MS PRO Duo, MS PRO-HG Duo cards
• Plug & Play: no drivers required
• USB 2.0 High Speed for up to 480 Mbps data transfer
To access a memory card using Windows:
1 Plug the USB cable into an open USB port on your computer. Your computer will
install the driver automatically.
2 Insert a card into the appropriate slot. The blue data LED lights.
Note: Insert MMC/SD/SDHC/SDXC cards with the label facing DOWN.
Caution: Insert the cards into the correct slot and in the correct direction. Failure
to do so may result in damage to your card and/or card reader.
Note: Insert the cards the microSD and MS are inserted label side UP. Cards
inserted into the SD slot must be label side DOWN.
3 Click Start, then click My Computer/Computer. Double-click the drive for the card
reader.
4 To access files and folders on the memory card, use normal Windows procedures
for opening, copying, pasting, or deleting files and folders.
5 When you are done working with the files on the memory card, right-click the
memory card drive in My Computer/Computer, then select Eject. The blue data
LED on the memory card reader turns off after the card is ejected. Remove the
card from the slot.
Caution: Do not remove memory cards while the blue data LED on the reader is
flashing. Doing so may result in loss of data or damage to your memory card.
Quick Setup Guide
To access a memory card using Macintosh OS 10.4.x or higher:
1 Plug the USB cable into an open USB port on your Mac.
2 Insert a card into the appropriate slot. The blue data LED lights and a new drive
icon appears on the desktop.
Caution: Insert the cards into the correct slot and in the correct direction. Failure
to do so may result in damage to your card or card reader.
Note: Insert the cards into the microSD and MS are inserted label side UP. Cards
inserted into the SD slot must be label side DOWN.
3 When you have finished working with the files on the memory card, drag the disk
icon to the Eject icon or click the memory card icon on the desktop and select
Eject. Then remove the card from the slot.
Caution: Do not remove memory cards while the blue data LED on the reader is
flashing. Doing so may result in loss of data or damage to your memory card.
Troubleshooting
Visit www.insigniaproducts.com for details.
FIND YOUR USER GUIDE ONLINE!
We are going green so a copy of your User Guide is not
provided in the box but is available online. Go to
www.insigniaproducts.com, then click Support &
Service. Enter your model number in the box under
Manual, Firmware, Drivers & Product
Information, then click .
Legal notices
FCC Information
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003;
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
One-year limited warranty
Visit www.insigniaproducts.com for details.
For additional information, see the online User Guide.
Contact Insignia
For customer service call 1-877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China