Before First Use; Operating Instructions; Cleaning, Care And Maintenance - Cuisinart CWT-100 Manual De Instrucciones

BEFORE FIRST USE

Remove all packaging and any promotional
labels or stickers from your Warming Tray.
Be sure that all parts (listed in Parts and
Features) of your new Warming Tray have
been included before discarding any packaging
materials. You may want to keep the box and
packing materials for use at a later date.
Before using your Cuisinart
the first time, clean the warming tray with a mild
detergent and a soft moist cloth.
DO NOT SUBMERGE THE WARMING BASE
OR LET THE PLUG COME IN CONTACT WITH
WATER. DO NOT ALLOW WATER TO SPILL OR
SEEP INTO THE FRAME. Rinse and wipe dry.
Heat the warming base for approximately
10 minutes at a maximum setting.
NOTE: Temporary smoking might occur.
This is normal during initial use.
OPERATING
INSTRUCTIONS
1. Plug unit in. The red power ON light
will come on. Set thermostat to desired
temperature setting.
2. NOTE: Food placed on warming tray
should be FULLY cooked and already hot.
The Cuisinart
®
to keep food warm only. This product is not
a cooking appliance.
3. Foods containing little or no liquid
should be kept on lower setting and
stirred periodically.
4. Be sure to use containers that are
heatproof. Note: Tray is not designed
to keep large, deep pots full of food or
liquid warm.
Warming Tray for
®
Warming Tray is designed
CLEANING, CARE
AND MAINTENANCE
Do not use any scouring agents or abrasive
pads. The best way to clean the Cuisinart
Warming Tray is with a mild detergent and a
soft moist cloth.
DO NOT SUBMERGE THE CUISINART
WARMING TRAY BASE OR LET THE HEAT
CONTROL COME IN CONTACT WITH WATER.
To polish use a nonabrasive glass cleaner. Any
food residue remaining can be wiped away with
a soft sponge. Rinse and wipe dry.
DO NOT ALLOW WATER TO SPILL OR SEEP
INTO FRAME.
Any other servicing should be performed by
an authorized service representative.
5
®
®