Trust GXT 27 Manual Del Usario página 5

Steering Wheel – USER'S MANUAL
Settings for PC and Playstation2/3
Switch vibration feedback on/off
4
Press "Select"+D-pad (up) for 1 second to switch on/off the vibration feedback:
All 3 LEDS will flash 3 seconds for confirmation
Sensitivity settings:
5
Press "Select"+D-pad (right) to cycle through sensitivity settings:
blue LED
Level 1:
green LED
Level 2:
red LED
Level 3:
Level 4: blue and green LED
red and green LED
Level 5:
blue and red LED
Level 6:
Swapping buttons: (∆, O, X, , L1, R1, L2, R2, L3, R3)
6
Step 1 Press "Select" for 3 seconds.
Step 2 Press button you want to change
Step 3 Press button of the function you want to assign.
(All 3 LEDS will flash for confirmation)
Step 4 Press "Select" to Exit programming mode.
Step 5 Repeat step 1,2,3 and 4;
begin with button from step3.
Pressing 'Mode' button for 3 seconds will reset all programmed button to their default setting. (Red LED will
flash for confirmation)
X-Input mode
By pressing the start button when inserting the USB plug into the PC. The X-Input
mode will be enabled.
If your game does not support XInput, the steering wheel will not be recognized in
the game. Unplug the USB plug from the PC and reconnect it (this time without
pressing the 'start' button) to re-enable regular input (DirectInput)
XInput has a couple of advantages compared to DirectInput. It will automatically
load the default configuration for the steering wheel in the game and vibration
feedback will be enabled.
Windows 8
When checking the game controller properties in Windows 8 it may seem that the Z-Axis is not responding. This
is a bug in the Windows 8 system!
Go to the 'settings' tab and 'Calibrate' your game controller to see that the Z-Axis is working properly.
least sensitive
most sensitive
4