Preparing For Use - Professional Series PS75851 Manual Del Usuario

14. Always unplug the appliance after use.
15. Never inmerse the motor unit in water or any other liquid. Do not rinse
it either.
Parts: 2

Preparing for use

1. Wash all detachable parts(see chapter 'Cleaning').
2. Put the plug in the wall socket.
3. Place the juice collector into the appliance (1) and place the pulp con-
tainer into the appliance by tilting it forwards slightly(2).Insert the top end
first and then push home the buttom end .(Fig.2)
While you are preparing juice, you can empty the pulp container by
switching the appliance off and carefully removing the pulp container.
Note: Reassemble the empty pulp container before you continue juicing.
4. Put the filter in the juice collector(1) and hold the lid over the filter and
lower it into position(2). (Fig. 3)
5. Snap the safety clamp onto the lid to lock it into place('click')(1) and slide
the pusher into the feeding tube by aligning the groove in the pusher with
the small protrusion on the inside of the feeding tube(2). (Fig.4)
Make sure the safety clamps are locked into the position on either side of
the lid.
6. Place the juice jug under the spout.(Fig.5)
Place the lid on the juice jug to avoid splattering or if you want to store the
juice in the refrigerator.
To separate the foam from the juice when pouring the juice into a glass,
insert the foam separator by sliding it into the juice jug.(Fig.6)