Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Utilization:
⚫ Connect the appliance to safety socket.
⚫ Turn on switch to the heating position (I or II or III).
⚫ The heating functions (
Heat setting I
Heat setting II
⚫ Turn the thermostat knob in the direction of clockwise until reaching the
maximum temperature.
⚫ Once the room temperature is reached, slowly turn the thermostat knob in the
direction of anticlockwise until you get your required temperature.
⚫ Turn the switch to "0" position to switch off the heater. Unplug the appliance
then after.
Overheat safety device
⚫ Your heater is fitted with a safety device to switches off the heater in the event of
overheating. If the safety device operated, please turn the heater off, unplug the
appliance and let it completely cool, inspect for blockage of air inlet or outlet,
attempting to restart the heater then after.
⚫ If the heater fails to operate or the safety device switches the heater off again,
return heater to your nearest service center for examination or repair.
Maintenance:
4. Always disconnect the appliance and let it completely cool before any maintenance.
5. Use a vacuum cleaner to remove dust on grilles.
6. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth.
Never immerse the unit in water, nor let water drip into the unit.
).
III
1000W
2000W
Tabla de contenido
