Tabla de contenido
BRUSHLESS ESC - 30A
SPECS
DETAILS
DETAILS
VOLTAGE
MAX AMP
CONNECTIONS
HOW TO START
1.
Connect the ESC to an AUX channel which is controlled by a potentiometer (we
recommend CH6) .
2. Set ESC transmitter channel to the lowest position.
3. Connect the battery to the ESC. The ESC doesn‟t have switch,
so it will start as soon as you connect the battery.
3. A little song will start.
4. Once the song has finished, you can now use the ESC.
COMMON PROLEMS
1. ESC give a continuous beep-beep-beep:
The channel is not at the lowest position. Please, set dial/stick to its minimum.
2. Start the ESC with channel at its maximum. The ESC will enter to the programming
mode.
Set the channel to the opposite direction and restart the ESC.
Please note that this product is not a toy and not suitable for youngters under the age of 16. Technical details may be
subject to changes and modifications. All images and designs are property of MAGOM HRC. For any doubts or
questions, please contact us throught www.magomhrc.com.
ESC for brushless motor
1/14 Scale full metal excavator
7.4 V – 11.1 V
30 A
www.magomhrc.com
6005-101
Tabla de contenido
