Wireless Bluetooth Audio Source; Fm Radio Audio Source; Radio Reception; Programming Radio Stations Automatically - Honeywell Ovale OVD270 Manual De Instrucciones

WIRELESS BLUETOOTH AUDIO SOURCE

Play wirelessly from a Bluetooth device.
Bluetooth
Bluetooth
1.
Go to the Bluetooth Audio Source Mode by pressing the
Button on the Docking Speaker or the
the Remote Control until you see
Screen. The Button will flash while the Docking
Speaker is trying to pair with a Bluetooth device.
2.
Go to the Bluetooth settings on your smartphone, tablet,
computer or other Bluetooth device. Search and connect
to "Ovale Speaker".
3. The Button will stop flashing when your Bluetooth
device has been paired successfully.
4. Disconnect your Bluetooth device from the "Ovale
Speaker" when you want to pair with a new device.
Alternatively, you may pair an additional device or a new
device by pressing and holding the
the Remote Control for about 3 seconds. The Ovale
Speaker will then switch back to Bluetooth pairing mode,
ready to connect to a new device.
5. Repeat steps 1 to 3 to pair another Bluetooth device.
6.
Disconnect your Bluetooth device from the "Ovale
Speaker" when you want to pair with a new device.

FM RADIO AUDIO SOURCE

Play FM Radio Stations.
1. Go to the FM Radio Audio Source Mode by pressing the
Button until you see a radio station number (for
example "87.5") on the LED Display Screen.
2.
In this mode, press the
Control to search and choose an FM Radio Station to
listen to. Press the
/
Speaker for 2 seconds or more to activate the
auto-search mode to automatically search for the next
available radio station. After auto-search finds a station,
pressing will terminate auto-search mode and
/
allow you to search for radio stations manually.
All manuals and user guides at all-guides.com
Flashing Light
not paired
Steady Light
paired
Button on
on the LED Display
Button on
/ PAIR
Button on the Remote
/
Button on the Docking
FM RADIO AUDIO SOURCE (CONTINUED)

Radio Reception

FM DC IN 12V
ANTENNA
Only FM Radio Stations can be received on this Docking
Speaker. Sometimes the radio reception can be unclear.
For optimal radio reception, adjust and extend the Radio
Antenna located on the back side of the Docking Speaker.
IMPORTANT: It is recommended to position the Radio
Antenna away from other radio receiving devices that can
cause interference with radio reception, such as a TV,
VCR or other radio players.

Programming Radio Stations Automatically

1. Press and hold the PROG Button located on the Remote
Control for more than 2 seconds. "AUTO" will display on
the LED Display Screen.
2. The Docking Speaker will automatically search for
available radio stations and program them in the order of
waveband reception strength.
3. The first programmed radio station will broadcast
automatically upon completion of auto-programming.
Programming Radio Stations Manually on the Remote
Control
The PROG Button on the Remote Control is also used to
manually preset your favorite FM radio stations in the FM
Radio Audio Source Mode. You can program up to 20
preset radio stations.
1. Press the / Button on the Remote Control to select
the FM radio station that you wish to preset in a Preset
Program.
2. Press the PROG Button on the Remote Control once. The
LED Display Screen will display a number from "P01",
"P02" to "P20". "P01" represents "Preset Program 1"
and "P02" represents "Preset Program 2" and so on.
Press the ▲ and ▼ Button on the Remote Control to
3.
select the Preset Program number where you want to
preset the chosen radio station (from P01 to P20).
4. When you have reached the Preset Program, press the
PROG Button once. This will automatically program the
radio station in the chosen Preset Program.
FM
ANTENNA
Radio Antenna
AUX IN
7