Battery Power Supply; On/Off Switching - Trevi DVBX 1412 Guía De Referencia Rápida

DVBX 1412 ENGLISH
POWER SUPPLY AC 110-230V 50/60Hz
The supplied adapter operates with an AC 110-230V 50/60Hz power supply. Connect the adapter jack into the
external power socket (19) and the plug into a mains socket.
NOTE
Use the supplied adapter only. Different appliances may have polarities and/or voltages other than those required.

BATTERY POWER SUPPLY

This DVD player uses a lithium rechargeable battery. Once the battery is recharged, the DVD player can be used
without being connected to a power socket.
BATTERY RECHARGE
Only recharge the battery indoors with the player switched off.
1. Connect the adapter jack into the DC IN 9-12V socket (19).
2. The charge indicator (23) lights up: Red indicates battery charging, green indicates battery charged.
The battery is completely recharged in approx. 3 hours.
CONNECTION TO TV
1. Connect the jack of the A/V cable to the AV IN/OUT (16) socket of the player.
2. Connect the RCA connector of the A/V cable to the AV input on your TV (please, refer to your TV manual).

ON/OFF SWITCHING

1. Set the ON/OFF switch (18) to the ON position to switch on the player.
2. Set the ON-OFF switch (18) to the OFF position to switch off the player.
AUDIO FUNCTIONS FOR ALL TYPES OF SOURCES
VOLUME ADJUSTMENT
Press the VOL+/VOL- (14/5) keys on the remote control to increase/decrease the volume.
MUTE FUNCTION
This function mutes the audio of your player completely.
1. Press the MUTE key (27) on the remote control; the audio is muted.
2. Press the MUTE key (27) on the remote control again to restore the audio.
USB PORT USE
WARNING:
Connect the USB stick/MP3 player only if the player is switched off. Once connected, switch on the
player.
If a USB stick/MP3 player is connected when the player is switched on, it might not be recognized by the
unit and therefore not work.
1. Connect the USB stick/MP3 player to the USB port (14) on the side of the appliance.
2. Switch on the player.
3. Press the SOURCE key (9) on the remote control and select the USB function by using the navigation keys.
4. Playback starts automatically.
Note:
The player may not support some devices equipped with a USB port due to incompatibility of some processors.
SD CARD SLOT USE
WARNING:
Insert the SD/MMC Card only if the player is switched off. Once inserted, switch on the player.
If the SD/MMC Card is connected when the player is switched on, it might not be recognized by the unit
and therefore not work.
1. Connect the SD/MMC Card into the SD/MMC Card slot (13) on the side of the appliance.
2. Switch on the player.
3. Press the SOURCE key (9) on the remote control and select the SD function by using the navigation keys.
4. Playback starts automatically.
5