Test The System - Quadient DS-75 Desembalar Y Instalar

4. Press the i button to follow the status of the connection.
5. The initial declaration call is finished if the System status shows "Pending declaration".
6. Press Connect
7. Press the i button to follow the status of the connection.
8. The declaration call is finished if the System status shows "Declared".

Test the system

1. Load document feeder trays.
2. Load the envelope hopper.
3. From the 'Home' menu press
Automatic.
4. Press the 1x button. If necessary adjust
address position, insert position and insert
fingers.
5. Select a job and write down its fold settings.
6. Press the 1x button.
7. Verify that the folds are in the correct position. If not correct, adjust it (service menu,
system settings,
8. Verify the flap closer quality. If not correct, adjust it (service menu,
settings, Flap closer
Define jobs
Define any jobs according to the customer's wishes / applications.
6
again for declaration.
New
Folder offset).
offset).
Job,
System