iOttie Auto Sense Manual De Instrucciones página 4

Using the Auto Sense Mechanism
Once it is unplugged or car is turned off, the Auto Sense's internal battery
keeps a charge for up to one hour.
Mounting and Charging
1. Side arms on mount automatically
open via silent step motor for one
second when phone is detected in
front of Proximity Sensor on mount.
Releasing Device
3. Buttons under the light on both
sides of device can also open
and close the arms. One or both
buttons can be pressed.
• The Auto Sense is powered via a
micro-USB cable and coil cell battery.
There is no on/off switch on the device.
Once it is plugged in, the device will
remain on unless the vehicle shuts off
power when in parking mode.
90% Charged
2. Once phone is placed in mount,
arms will automatically close after
one second. Qi wireless charging will
start immediately.
Adjusting the Mount
1. Foot Knob
Out of box, the foot knob is set to
regular sized phones. Foot will need
to be adjusted for plus sized phones
or cases with thicker bottoms.
3. Telescopic Knob
Located on top of Telescopic Arm,
loosen to extend the arm, and
tighten to secure distance.
Move the knob down until laser
etching is aligned appropriately as
shown in line drawing.
4. Pivot Knob
Located on the side of the Mount
Base, turning allows you to pivot
telescopic arm. Tighten to secure
position.