Febo Flame F16-I-006-089 Manual Del Usuario página 3

INSERT OPERATING INSTRUCTIONS
Read all instructions and warning prior to
operating the appliance.
1. Ensure that all controls are in the "OFF" status
before plugging the appliance into a properly
grounded electrical outlet.
This appliance is for use on 120 Volts. The
appliance has a 3-prong grounded plug. If your
electrical outlet has only 2 slots, you will have to
use an adapter to convert from the 3-prong power
cord to a 2-slot receptacle. The green grounding
plug extending from the adapter must be securely
connected to a permanent ground such as a
properly grounded outlet box. The adapter should
only be used if a proper 3-slot receptacle is not
available.
NOTE: Adapters are not allowed for use in
Canada.
2. A 15 AMP circuit is required to operate this
appliance. If the breaker trips when the appliance
is running, you may need to move the appliance to
another location or unplug other appliances that
are on the same circuit.
The fireplace control functions can be accessed in
two ways:
- Using the button control panel,
located in the upper right-hand
corner of the fireplace
- Using the multifunction remote
control
The main control panel is located at the top right
corner on the front (see Figure 2).
1
2
PAGE 3 OF 34
Figure 1
Insert Control Panel
Display
Screen
Figure 2
!