golmar GB2 Nexa Modular Guía Rápida página 4

STAINLESS STEEL NEXA MODULAR GB2 VIDEO SYSTEM KIT – VILLAS
SAFETY PRECAUTIONS
- Always disconnect the power supply before installing or making modifications to the devices.
- The fitting and handling of these devices must be carried out by authorised personnel.
- The wiring must run at least 40 cm away from any other wiring.
- In the power supply unit :
w Do not overtighten the screws on the terminal block.
w I nstall the power supply in a dry and protected place free from the risk of water leaks or sprays
wAvoid locations that are humid, dusty or near heat sources.
wEnsure that the air vents are free from obstruction so that air can circulate freely.
wTo avoid damage, the power supply must be firmly secured in place.
wTo prevent electric shock, do not remove the cover or handle the wiring connected to the terminals.
CHARACTERISTICS
( )
*
- Video door entry system with simplified installation (non-polarised 2 wire bus).
- Up to 4 access panels (DP-GB2A distributor required for more than one access panel) per
installation.
- Up to 2 apartments (NX5110 1-apartment kit and NX5220 2-apartment kit) per installation.
- Maximum 18 Thera monitors per installation.
- Maximum 16 Thera monitors in one apartment.
- Maximum 4 Thera monitors in parallel (without distributors) per installation.
- Installation with Thera monitors (FA-GB2/A power supply required).
- Call confirmation tone.
- Visual indications on the door panel for people with impaired hearing (indicating call process,
communication, door open and channel busy).
- Audible indications on the door panel for people with impaired vision (indicating call in progress,
missed call, door open, call finished and engaged).
SYSTEM OPERATION
- To make a call, the visitor must press the button of the apartment; an audible sound indicates that
will turn on. If vocal synthesis is enabled, a "Call is in progress"
the call is being made and LED
message appears to indicate a call is being made. At this moment the apartment's monitor(s)
receives the call. During the call the visitor can correct his call by pressing a push button
corresponding to a different apartment, in which case the original call is cancelled.
- In systems with several access doors, the other door panel(s) will be automatically disconnected.
If another visitor tries to call, a telephone tones will be heard to indicate that the system is busy
will illuminate. If vocal synthesis is activated, the message "System is busy, try later"
and LED
will be indicated on the door panel.
- The call lasts for 40 seconds. The image appears on the monitor (with code 0 "apartment 1" or
monitor 16 if the call is in "apartment 2") when receiving the call without the visitor knowing.
If the call is not answered within 40 seconds, LED
- To establish communication, press button
turn on. If the vocal synthesis is enabled the message "you can speak now" will be heard confirming
the communication is activated.
- Communication will last for one and a half minutes or until button
communication has finished, LEDs and
synthesis is activated, a "Communication is finished" message will indicate that the call is over.
- To open the door, press button during the call or communication processes: one press will
activate the lock release for five seconds and LED
synthesis is activated, a "Door
is o pen" message will be indicated on the door panel
- For a description of the functioning and setup of the monitor, see the monitor's user manual.
( ) For more information, see the "TKIT632 THERA User Manual (code 50121904)".
*
https://doc.golmar.es/search/manual/50121904
will turn off and the channel will be freed.
on any monitor in the apartment. Door panel LED will
is pressed again. When
will turn off and the channel will be freed. If vocal
will also turn on for five seconds. If vocal
.
2
STAINLESS STEEL NEXA MODULAR GB2 VIDEO SYSTEM KIT – VILLAS
DOOR PANEL INSTALLATION
( )
*
Positioning the embedding box:
Make a hole in the wall to position the top of the door panel at a height of 1.65m.
.
Hole dimensions: CE-610 embedding box, 125(W) x 140(H) x 56(D) mm.
( )
Description of the door panel LED lights (for low light conditions).
*
( ) Description of the visual indications on the door panel.
*
( )
Description of the vocal synthesis (audible indications on the door panel).
*
( ) Adjusting the vocal synthesis volume.
*
Adjusting the door panel communication volume.
If after starting the system the door panel audio volume seems inadequate, follow these steps:
- Call an apartment .
- The call is received in the apartment. Establish communication by pressing push
T
button on the monitor.
- Next, press the push button used to call the apartment for 3 seconds until a number of
con rmation tones are heard and the door panel communication LED starts to blink.
- Each press on the same call button will increase the door panel volume and LED blink speed.
.
There are 5 volume settings and the blink speed of LED
blink - low to high volume. After reaching "setting 5", that is, maximum blink speed and volume,
the next setting is "setting 1", that is, minimum blink speed and volume (carousel mode).
-
To save the volume setting keep the push button used to call the apartment pressed until a
number of con rmation tones are heard and the door panel communication LED turns off.
LOCK RELEASE INSTALLATION
( )
*
Lock release installation instructions:
If the lock release is to be fitted to a metal door, use a Ø3.5mm drill bit and
thread the hole made. For wooden doors, use a Ø3mm drill bit.
IMPORTANT: The lock release must be Golmar 12V AC or DC. With AC lock
releases, fit the varistor supplied with the kit directly to the terminals of the
lock release to ensure the device functions correctly.
( ) For more information, see the "TKIT632 THERA User Manual (code 50121904)"
*
https://doc.golmar.es/search/manual/50121904
1850
1650
1450
will increase for each. Slow to fast
3,5 x 25
DIN-7972
M 4 x 8
DIN-963
3