Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
Install the batteries
The speakers are powered by four AAA batteries. Alkaline batteries are recommended. To
install the batteries in pairs, slide the battery cover on the outer side of each speaker
toward the hinged end of the speakers, place the batteries as indicated in the battery
compartment, and close the battery cover by sliding it to the opposite direction. During
long periods where the speakers are not used, remove the batteries to prevent damage
from battery leakage.
Use the speakers
You can use the speakers folded together or unfolded (for example, to form a V shape).
The speakers are convenient to carry when folded. The speakers can be unfolded up to
approximately 180 degrees. Do not try to force the speakers open more.
To connect the speakers to the phone or audio device, plug the speaker cable into the
connector on the device. If the phone or audio device has a
Pop-Port connector or a 2.5-mm connector, connect the AD-15 or AD-50 adapter
(respectively) to the device. Then connect the speaker cable to the adapter.
To switch on the speakers, slide the power switch located inside the unfolded speakers
toward the hinged end. The green indicator light turns on. To switch off, slide the power
switch to the opposite direction, or fold the speakers closed. The indicator light turns off.
To set the volume, use the volume controls on your audio device. If the sound level of
the speakers becomes too low, change the batteries.
To carry the speakers, fold them and place them in the supplied pouch.
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated with
care. The suggestions below will help you protect your warranty coverage.
•
Keep all accessories and enhancements out of the reach of small children.
Tabla de contenido
